Water Rocket Launch Head Instructions

Overview

Bill of Materials

Construction Steps

hdg 3:

  1. Cut a 4" and 11" lengths of 1/2" Schedule 40 PVC. These form the launch head base and the launch piston.
  2. Cut a 4" piece of 1/2" CPVC pipe. This will form an inside coupler between the launch head base and the launch piston.
  3. Using a 5/8" SpeedBore or other wood spade bit, backbore

Techniques

Backboring

Back bore using a wood spade bit. Run the bit clockwise; holgin

Safety & Tips